Відео

Great info! As a best practice, what would be the average mileage to ensure that the jeep will still give you peace of mind in the years to come? Thanks!

I have this pool but my f and e connectors are missing any idea where I can get some at?

Are the distributors in a fixed position on these? In my experience, which is absolutely zero with Jeeps (just got my first YJ) you get it to tdc on #1, and just drop the distributor in, wherever it's now pointing, is now the #1 plug wire. But those were adjustable.

Everyone does easy .I ll pay to see you do a 2001 pt cruser .o n the car 😂

I can't get the saddle tilt to stay put no matter how hard I tighten the wing nuts... The weight of the transmission is just too much for that cheap wing nut set up. Either that or I just got a faulty one but other than that it's a great lift.

Exellent job my friend.

Hello Dale 👋

Mine is making the same sound! We completely replaced the distributor cap and rotor button, added WD40 all of that and it’s STILL making this OBNOXIOUS noise! What do I do now?

*_FANTASTIC!_* You're the only person who has uploaded instruction on how to replace this seal on a Dana 30 CAD axle. Factory service manual and other manuals don't address this. Very clear, well-detailed/filmed and informative. You even provided links for easy access to parts that are otherwise very difficult to find. Many thanks!!!

I’ve done this too many times with a floor jack and my feet. It’s awful. But you can massage the angle when installing it.

Hey Dale. Long time watcher first comment! So I have a Jeep YJ and I checked it per the video and my O2 sensor is good (code 51). At idle the Jeep will start low idling to sputter and then kick back up to normal idle and cycle back and forth. No other issues during driving. I checked the wire from the engine compartment and I’m getting a low voltage reading (100 DC mV - 400-800 is norm op range)…. And I cannot figure out what the issue is. All new(er) air and temp sensors in the engine bay and no vac or exhaust leaks I can see. Any tips??

I’ve watched a few of your videos and they are very helpful to me. I have 95 jeep wrangler with the 4.0 in it. At some point I plan on putting in an all aluminum radiator in it.

WHAT IF YOU DONT GET ANY READING ON THE RESISTANCE??

Is this the 5.2(which I have)? Also, there are 2 options for the seal. One like you have, which we used. And another with "ears" on either side of 1 of the seal halves. What's the difference? I can't find any information on this. Anyways, as soon as we started the engine, pressure was at 40psi. Everything seemed fine. 5 minutes later, the seal was leaking again! Even worse! We didn't use lock-tite or rtv. And didn't loosen othe caps bolts. Not 100% sure my buddy kept the 2 bolts in order. Please help. This is my only vehicle and I drive 21 miles to work.

Very helpful, thank you. 😊

Thank you Sir for helping me out with this video to replace the windshield gasket. But there were more stuff I had to remove, like the both sides visors and side moldings. 👍🏻🤙🏻 From Redondo Beach, Los Angeles, California.

Great idea!

Have same issue on my 98. Put on new calipers and replaced original flexible lines. Also tested brake fluid. It was on the high side for water content. Drained and replaced. I think when I replaced calipers 3 years ago I left the cap off the master for a few days which probably led to the high water content. Live in the Southeast so it is humid. Will see.

That new timing chain was loose loose, should of went mopar

Awesome thanks dude!

ya your head gasket is cooked and dont fix the leak, just pour money on it

What torque wrench do you use?

A lot of what you use is vehicle specific. My 03 Tacoma requires Gl-3 or Gl-4, while my 19 Subaru requires an oil that meets GL-5 specs since it shares the oil with the front differential

Will this remove algae from the bottom?

Just replace it

Hi great videos by the way!! 👍🏼 I have recently purchased a 1997 XJ Cherokee ( love it!!) I have been towing with it this weekend, so working harder that normal, after switching off the engine water was coming out of the expansion vessel, I have left it overnight, topped up the coolant and driven it to my garage and the temperature stayed at a nice 90°c Do you want this to be a long-term vehicle for us? So what would you do to guarantee a hasslefree future for this vehicle regarding cooling and overheating? Love you by the way, look forward to hearing from you, Chris (UK).

Pomp needs to be turned off, right? When are people pooling? So that you don't get electrocuted?

product called Challenger . used to clean the trucks at work sells at Ace harware, manardes $ 9.00 a gallon. used it for 30 years . leaves film on glass, eats away latex paint. cleans bathtub rings great. cleans tires exellent

My Temp and oil pressure gauges just stopped working. All the lights and all the other gauges are fine. Any suggestions? I just put a new circuit board in it as well as new bulbs while I had it apart.

Is this an opportunity to change the plugs??

Another jack stand, # 56373 that was meant to replace the initial recalled 3 ton stands, was recalled in July 2020 due to a welding defect 😬 The information for the July 2020 recall doesn't seem to be as prevalent in google search results as the initial May 2020 recall.

Tire method def a country thang 💪

Dale just curious what happened to the original engine on the xj the last I heard it was I believe was running pretty good.

This may be an old video but it’s still out there helping people, like me. Today. Perfect explanation and straight to the point. Replaced mine in under an hour and my YJ is shifting like brand new again. Much thanks.

lol 😂 30 min it took me 2 hrs

Top class.

That what she said you know you a box cutter on them don't you play me a lot easier you don't have the Dennis anything

Great video I'm getting ready to purchase this particular pool and I was wondering for my first pool do I have to fill this all the way up to 48 in my grandkids are not that tall yet they're roughly around 44 to 46 inches. Thanks for your videos and any help

its june of 2024, my 17th birthday is in march of 2025 and me and my dad just decided we were going to take our 91' jeep yj with a 6 cylinder 4L engine apart and rebuild it to be my first car. wish us luck.

I am reassembling and the plate shown at 4:15 spins when the ignition pin drops. Any suggestions on how to get it to stay put?

Good job, Dale.

Hey There, so mine has some hesitation here and there and you mentioned it was the Cam sensor. I’m having trouble verifying mine even has one. I didn’t pull off the cap yet. Definitely has the crank sensor but it’s not in the distributor cap. You said yours was. Is yours a 4.0 or 2.5? Mine is the 2.5 Thanks for any help.

Thank you I’m new to jeeps and didn’t think it was normal for the vent to spin so freely great video

Yeah but when are u comming to help me and my no start 1995 yj ..replaced so much..must be bad grounds

I'll use your method to clean my car injectors.

I’ve been detailing for a while now, and purple power has a lot of people backing it. It’s an all purpose cleaner and degreaser, so it would work well for this. But I’d recommend a European based company called Bilt Hamber and their Surfex HD. It’s really safe but cuts through anything.

I know this is 5 years old but as far as washing parts, those 5 gallon square tubs that kitty litter comes in makes for some pretty good scrub tubs for kerosene or diesel as a cleaner and it doesn't break down when it's stored in them.

I think they have you peel the film off the adhesive tape after you get the fender flare in place in case you need a wiggle room to get the screws to line up that attach the flares to the mounts. Then you could peel the backing off after the screws are started...at least that would seem like a logical explanation. Thanks for the video, I was thinking about ordering some for my YJ. They look great!

Haha, I like the bloopers part more.. lol kidding aside, can you use brake cleaners with your tires/wheels on?

Where did you buy the bolts to replace the E-12's on the top of transmission?